SOLO HARNESS

Designed to meet all the needs of demanding technical divers, the Solo Harness System is clean, simple, and foolproof!

500SE DC7 REGULATOR DIN

Old School. New Tech. The new 500SE utilizes a servo controlled valve to provide precision airflow and unparalleled performance for both air and trimix divers in a side exhaust configuration. To achieve this, we have perfected the original "lever-servo valve" we designed 35 years ago. Overbalanced diaphragm first stage also provides ideal hose routing for both backmount and sidemount users and optimum performance regardless of depth.

BLACK WEIGHT POCKET 2.3 KG UNIT

High resistance cordura weight pocket for harness, with capacity for 2.3 kg ballast pads approximately. Fast closing and release clip in plastic on the outside and flap with Velcro. Ideal to place on harness webbing, tank webbing and even on belts. Stainless steel eyelet at the bottom for water drainage and rear strap to adjust to bottle buckle or harness. Sold by the unit.

221 DC3 REGULATOR DIN

Built with the same quality as the DC1, without the swivel turret, the DC3 is the ideal 1st stage for double cylinder configuration as well as perfect for single cylinders. Paired with the 221 which uses the same technology as the 212 without the dynamic adjustment. This reg set is designed for those who believe keeping it simple is best.

ACCESSORIES POCKET BLACK

Heavy duty cordura accessory holder pocket for harness or jacket, perfect for carrying small accessories and even a spare mask . Ideal to place on harness webbing, jacket and even on belts with webbing up to 50 mm.

SEIKA GPS SYSTEM FOR SUEX DPV

Suex brought the GPS signal underwater in wireless mode - SEIKA transmits the position to all ERON D-1s in the water. SEIKA uses an embedded GNSS (Global Navigation Satellite System) receiver within an SMB (Surface Marker Buoy) to capture precise diver position and communicate wireless that position to the Suex Eron D-1 dashboard.

210 HO2 REGULATOR OXYGEN DIN

The 210/O2 + HO2 Tech Regulator features a bulletproof design, certified for up to 100% oxygen service thanks to highly specialized component materials and manufacturing processes.

XTREM KANGAROO SMALL HANDBAG

The TDS Xtrem Kangaroo pocket is a pocket specially designed for technical diving, being valid for both backmount and sidemount systems thanks to the versatility of its design. A pocket designed to the smallest detail to offer maximum performance to the technical diver.

A700 SECOND STAGE

Integrating air-balanced valve technology, the A700 brings you extraordinary breathing performance in a striking, precision-handcrafted, full-metal package. Whatever your dive destination, the SCUBAPRO A700 lets you breathe effortlessly and naturally underwater for a lifetime of exceptional dive experiences.

G260 SECOND STAGE

The G260 is a new balanced adjustable second stage featuring metal components for excellent cold water resistance (inlet tube, orifice, inhalation control knob and hose connector).

TRIM WEIGHT POCKET

Designed to be mounted on 2 inch webbing, vertically or horizontally. Can be used on nylon tank bands to augment the divers trim.

S600 SECOND STAGE

A second stage regulator must translate natural breathing behaviour into mechanical reality. A high quality second stage can significantly reduce stress and enhance diver safety by providing smooth, low-effort breathing response, resulting in ample yet controllable quantities of air.The designation balanced and classic downstream are also distinguishing marks for second stages and again imply ultimate flow performance and stability in addition to reliability, simplicity and solid performance.

ARMADILLO BACK PAD

Additional rear part of backplate for attaching the sidemount bottles.Material: Cordura 1100, webbing, stainless-steel AISI 316. Weight: 0,28 kg

REGULATOR NECK BAND

Elastic rubber band for fixing the emergency regulator to the neck. Easy to locate and can even keep the second stage fixed to the mouth in an emergency situation.

ADITIONAL POCKET

Additional pocket for backplate ballast system or belt. Dimensions 18x15x4 cm

OXYGEN 1st STAGE FOR APD REBREATHER

AP Diving first stage for oxygen , made with a new design. It is special for this brand rebreathers and is riding standard. Connection DIN 300 M25. Green indicator for Oxygen

BACK PLATE POCKET

Designed for placing a buoy or a lifting bag between the backplate and diver´s back. Stainless-steel screws for attaching the pocket to the backplate are included.

OXYGEN 1st STAGE M26 FOR APD REBREATHER

AP Diving first stage for oxygen , made with a new design. It is special for this brand rebreathers and is included as standard. Connection DIN 300 M26. Green indicator for Oxygen

DILUENT 1st STAGE FOR APD REBREATHER

AP Diving first stage for diluent made with a new design. It is special for this brand rebreathers and is included as standard. Connection DIN 300.Swivel turret

POCKET W/ CARABINERS & CUT SYSTEM

Small if not necessary, big when has to be. Big Cordura 1000multi-compartments pocket to fasten to Side Mount back, thanks two double ended stainless steel snap links. Made to keep a low profile when empty, the pocket is furnished with scissors.

BACKPLATE WEIGHT POCKET 4.5 KG (Pair)

Ballast system for back plate, consisting of two pockets that are attached to a webbing and end in a riveted ring, which is attached to the holes of the back plate. The left pocket includes a D-ring for attaching a pressure gauge or monitoring device.

WEIGHT POCKET FOR BACK PLATE (Pair)

Ballast system consists of 2 pockets, which are slipped on a waist strap and fastened to a backplate (pair of bolts and nuts included). Left pocket has a D-ring for mounting a pressure gauge. Inside each pocket is an inner pocket with a handle for inserting the weights.